Lentry Utility Light Model TWSPX-SS-C34
Portable 2-Headed LED Utility Light
This Lentry® Utility Light System Model TWSPX-SS-C34 consists of our brightest LED (56,000 lumens total), XT height pole, utility stand, adapter, and Case C3422 to hold the 2-headed light during storage and transport.
For those who have a power source available or who already have a Lentry System and would like to run an additional light from it in another location, this system quickly adds light where you need it, limited only by the length of extension cord.
This system is also available with Case C5022 (holds the light head and XT height pole) as model TWSPX-SS-C50.
ALL-TERRAIN LEGS. Telescoping legs with four positive locking positions: vertical, normal, and two for uneven terrain. They allow setup nearly anywhere and ensure stable, solid operation. With legs, the light system overcomes common obstacles like tall grass, standing water, snow, and debris.
2-HEADED V-SPEC LED LIGHT. The 2-Headed V-Spec LED is extremely bright with two V-Spec LED heads on a single telescoping pole, giving you the functionality and versatility of dual lights with a single cord and single pole. Instant-on/instant-off, long run-times, low operating temperatures, reliability, low maintenance, and solid state electronics (no bulbs to burn out). Each of the two heads has its own on/off switch and pivots forward and back, while rotating over 360-degrees.
XT HEIGHT POLE. This system stands 6.5-feet tall with the legs flat and pole retracted, and can extend to just over 11-feet tall with the legs set on the tallest setting and pole fully extended. This is the most popular height of pole since the light can be used at any length, from fully retracted to fully extended. The pole (and light) an be disconnected (and reconnected) quickly from the Utility Stand for transport and storage.
V-SPEC CASE C3422. Rugged, waterproof case holds the 2-Headed V-Spec LED and meets US Military standards for protection against air, water, theft, and impact. Special polyethylene closed-cell foam inside is custom-cut and energy-absorbing; it cushions the LED light head, keeps the LED from shifting, and will not disintegrate with sun or water.
QUICK RELEASE. Hardware installed on the neck of the light allows the light head to be connected and disconnected easily from the telescoping pole just by turning a knob.
WARRANTIES. Backed by a 5-year warranty on the light head, lifetime warranty on the case, our overall 5-year “No BS” warranty on workmanship and materials, and Lifetime Factory Support.
|Lentry Model TWSPX-SS-C34 by Ventry Solutions, Inc.
|2-Headed V-Spec LED
|120V 336W (2.8A) each; 672W (5.6A) total
|28,000 lumens each; 56,000 lumens total
|UL, CE, IP68
|Number of Telescoping Poles
|V-Spec Case C3422
|2-Headed V-Spec LED head
|4 handles, wheels, 5 padlock spots, and 7 latches
|Dimensions (L x W x H)
|Utility Stand, collapsed
|30 x 7 x 8 inches
(86.36 x 17.78 x 20.32 cm)
|2-Headed V-Spec LED Head
|29.5 x 6 x 18 inches
(74.93 x 14.61 x 44.77 cm)
|XT Height Pole
|44 inches (111.76 cm), retracted
|33.5 x 13 x 22 inches
(85.09 x 33.02 x 55.88 cm)
|Utility Stand with Adapter
|18.5 lbs (8.39 kg)
|2-Headed V-Spec LED Light Head
|22 lbs (9.98 kg)
|XT Height Pole
|4.5 lbs (2 kg)
|29.5 lbs (13.38 kg), empty
|V-Spec LED Light Head
|All Other Components
|5 years workmanship and materials + Lifetime Factory Support
|Country of Origin
|USA. Lentry Systems are manufactured in Hauser, Idaho, USA.
Out of all available Accessories, the following may be added to model TWSPX-SS-C34.
TRUCK MOUNT. Alternate mounting option which holds the telescoping light and pole firmly to a wall, cabinet door, or side of truck. The light can then serve as both portable and truck-mounted lighting increasing value and function.
RECEIVER HITCH POLE MOUNT. Alternate mounting option which holds one telescoping light and pole, expanding the versatility and functionality of Lentry Lights.
Literature to download / print
Bid specs for
Lentry Model TWSPX-SS-C34
- Generic version of bid specs for Lentry Utility Light System Model TWSPX-SS-C34
- Specifications for all Lentry Light Systems & Lentry Utility Systems on one sheet
- Product Flyer for Lentry Utility Light System
- Lentry V-Spec LED Cases Flyer
- Lentry Lighting Systems Accessories Flyer
READY TO BUY?
Prices and products are available from our helpful Dealers and Ventry Solutions, Inc. Our product experts will help you choose the right model for your application and budget. Contact us now: (888) 257-8967