Lentry Light Model 1SPECS

  • 0.00

This Lentry® Light offers 1000w of power with an standard height, exceptionally bright, 28,000-lumen V-Spec LED. This model is a good choice if you need remote lighting that is bright, easy to use, and compacts down to fit in small compartments.

This model is also available with either a V-Spec LED Case C2318 (stores the light head and pole during transport and storage) as model 1SPECS-C23 or with Case C2318 and XT height pole as model 1SPECX+S-C23.

NOTE: Customers will need to provide the generator for any Lentry Lighting System purchase. Lentry Legs easily bolt on to the generator and easy-to-follow instructions will be provided.

ALL-TERRAIN LEGS. Outward curving, independently adjustable legs made of solid aircraft-grade aluminum, each having an easy-to-grab locking knob for fast, secure adjustments. Legs lift, level and protect the generator. They allow setup, rock-solid stance nearly anywhere, while overcoming common obstacles like tall grass, snow, steep hills, standing water and debris.

1000W HONDA EU1000i GENERATOR*. 900W continuous power. Quiet operation. Lightweight and compact, with top carrying handle. Fuel efficient, with low emissions. Computer-safe, reliable, clean power generation. Low-oil shut off protected.

V-SPEC LED LIGHT. The V-Spec LED’s light is bright white, quite similar to natural sunlight. It uses a combination of flood and spot lights, is instant-on/instant-off (no cool down time), long run-times, low operating temperatures, and uses very little power while offering reliability, low maintenance, and solid state electronics (no bulbs to burn out). The lens and optics are molded together for excellent light quality and wide, uniform, far-reaching illumination. Innovative cooling fins are incorporated right into the super-slim head making it very compact. The light head pivots far forward and back, while rotating over 360-degrees.

STANDARD HEIGHT POLE. Stands between 3.5- to 4-feet tall with legs and pole fully extended, giving you the elevation needed to overcome common obstacles while maintaining maximum portability, convenience, and small storage size. The light head and pole are compact and may be easily stored while remaining connected to the system or can be easily disconnected (and reconnected) quickly from the generator/legs portion of the system.

QUICK RELEASE. Hardware installed on the neck of the light allows the light head to be connected and disconnected easily from the telescoping pole just by turning a knob.

WARRANTIES. Backed by 1- and 5-year respective warranties on the generator and light head, our overall 5-year “No BS” warranty on workmanship and materials, and Lifetime Factory Support.

*The required generator must be purchased from one of our dealers or a local supplier.

Model Lentry Model 1SPECS by Ventry Solutions, Inc.
Patent US D684,309
Generator* Honda EU1000i
Output AC 120V 1000W max. (8.3A) 900W rated (7.5A)
"Rated" means the power the generator can supply continuously to run lights and other tools; “Max” wattage is available for short bursts.
Output DC 12V 96W (8A)
Receptacles 15A 125V Duplex, NEMA 5-15P
Fuel Capacity 0.6 gallons (2.4 quarts)
Run Times per Tankful (approximate) 3.2 hrs hours @ rated load (900W)
7.1 hours @ 1/4 rated load (225W)
6.5 hours with V-Spec light on (336W)
Noise Level 50 dB(A) @ rated load
42 dB(A) @ 1/4 load
Light Head V-Spec LED
Input 120V 336W (2.8A)
Output 28,000 lumens
Certifications UL, CE, IP68
Number of Telescoping Poles 1
Dimensions (L x W x H)
Generator with Legs Retracted 24 x 13.5 x 19.5 inches
(60.96 x 33.66 x 48.9 cm)
V-Spec LED Light Head 14.5 x 3.5 x 15 inches
(35.56 x 14.61 x 36.83 cm)
Standard Height Pole 15.25 inches (38.74 cm), retracted
Weights
Generator and Legs Portion 40 lbs (18.5 kg), dry
up to 44 lbs (20 kg) with fuel and oil
V-Spec LED Light Head 9.75 lbs (4.5 kg)
Standard Height Pole 2 lbs (1 kg)
Warranties
Generator 1 year commercial
V-Spec LED Light Head 5 years
All Other Components 5 years workmanship and materials + Lifetime Factory Support
Country of Origin USA. Lentry Systems are manufactured in Hauser, Idaho USA. Honda generators are not made in the USA but make up less than 50% of their value.
*The required generator must be purchased from one of our dealers or a local supplier.

Out of all available Accessories, any of these may be added to model 1SPECS.

LED CASE C2318. The lifetime V-Spec Case protects and holds the V-Spec LED head and the standard height pole. It is included with Lentry Light Model 1SPECS-C.

RECEIVER HITCH POLE MOUNT. Alternate mounting option which holds one telescoping light and pole, expanding the versatility and functionality of Lentry Lights.

TRUCK MOUNT. Alternate mounting option which holds the telescoping light and pole firmly to a wall, cabinet door, or side of truck. The light can then serve as both portable and truck-mounted lighting increasing value and function.

TACHOMETER. Digital display shows RPM and total hours on the generator. Helpful for performance report, diagnostics, and maintenance.

CARRYING STRAP. Over-the-shoulder carrying strap of industrial nylon allows allows for hands-free carry of the unit’s generator and legs portion.

These videos were taken in 2013; the unit looks a little different but functionality has not changed.

Literature to download / print

READY TO BUY?

Prices and products are available from our helpful Dealers and Ventry Solutions, Inc. Our product experts will help you choose the right model for your application and budget. Contact us now: (888) 257-8967