All-Terrain Lentry Jobsite Lighting System Model TWSPX-SS-C50 includes a 2-Headed V-Spec LED light head which offers 56,000 lumens total. This system stands over 11-feet tall when fully extended as shown, next to James, who stands over 6-feet tall. Case not shown

Lentry Utility Light Model TWSPX-SS-C50

  • 0.00

Portable 2-Headed LED Utility Light and Large Case

This Lentry® Utility Light System Model TWSPX-SS-C50 consists of our brightest LED (56,000 lumens total), XT height pole, utility stand, adapter, and Case C5022 to hold the 2-headed light and pole during storage and transport.

For those who have a power source available or who already have a Lentry System and would like to run an additional light from it in another location, this system quickly adds light where you need it, limited only by the length of extension cord.

This model is also available with Case C3422 (holds the light head only) as model TWSPX-SS-C34.

ALL-TERRAIN LEGS. Telescoping legs with four positive locking positions: vertical, normal, and two for uneven terrain. They allow setup nearly anywhere and ensure stable, solid operation. With legs, the light system overcomes common obstacles like tall grass, standing water, snow, and debris.

2-HEADED V-SPEC LED LIGHT. The 2-Headed V-Spec LED is extremely bright with two V-Spec LED heads on a single telescoping pole, giving you the functionality and versatility of dual lights with a single cord and single pole. Instant-on/instant-off, long run-times, low operating temperatures, reliability, low maintenance, and solid state electronics (no bulbs to burn out). Each of the two heads has its own on/off switch and pivots forward and back, while rotating over 360-degrees.

XT HEIGHT POLE. Stands 6.5-feet tall with the legs flat and pole retracted, and extends to just over 11-feet tall with the legs set on the tallest setting and pole fully extended. This is the most popular height since the light can be used at any length, from fully retracted to fully extended. The pole (and light) can be disconnected (and reconnected) quickly from the Utility Stand for transport and storage.

V-SPEC CASE C5022. Rugged, waterproof case holds the 2-Headed V-Spec LED & XT height pole while meeting US Military standards for protection against air, water, theft, and impact. Special polyethylene closed-cell foam inside is custom-cut and energy-absorbing; it cushions the LED light head, keeps the LED from shifting, and will not disintegrate with sun or water.

QUICK RELEASE. Hardware installed on the neck of the light allows the light head to be connected and disconnected easily from the telescoping pole just by turning a knob.

WARRANTIES. Backed by a 5-year warranty on the light head, lifetime warranty on the case, our overall 5-year “No BS” warranty on workmanship and materials, and Lifetime Factory Support.

Model Lentry Model TWSPX-SS-C50 by Ventry Solutions, Inc.
Light Head 2-Headed V-Spec LED
Input 120V 336W (2.8A) each; 672W (5.6A) total
Output 28,000 lumens each; 56,000 lumens total
Certifications UL, CE, IP68
Number of Telescoping Poles 1
Case V-Spec Case C5022
Holds 2-Headed V-Spec LED head & XT height pole
Includes 3 handles, wheels, 6 padlock spots, and 8 latches
Dimensions (L x W x H)
Utility Stand, collapsed 30 x 7 x 8 inches
(86.36 x 17.78 x 20.23 cm)
2-Headed V-Spec LED Head 29.5 x 6 x 18 inches
(74.93 x 14.61 x 44.77 cm)
XT Height Pole 44 inches (111.76 cm), retracted
Case 49.5 x 9 x 21.5 inches
(125.73 x 22.86 x 54.61 cm)
Weights
Utility Stand with Adapter 18.5 lbs (8.39 kg)
2-Headed V-Spec LED Light Head 22 lbs (9.98 kg)
Case 30.5 lbs (13.83 kg), empty
Warranties
V-Spec LED Light Head 5 years
Case Lifetime
All Other Components 5 years workmanship and materials + Lifetime Factory Support
Country of Origin USA. Lentry Systems are manufactured in Hauser, Idaho, USA.

Out of all available Accessories, the following may be added to model TWSPX-SS-C50.

RECEIVER HITCH POLE MOUNT. Alternate mounting option which holds one telescoping light and pole, expanding the versatility and functionality of Lentry Lights.

TRUCK MOUNT. Alternate mounting option which holds the telescoping light and pole firmly to a wall, cabinet door, or side of truck. The light can then serve as both portable and truck-mounted lighting increasing value and function.

Literature to download / print

READY TO BUY?

Prices and products are available from our helpful Dealers and Ventry Solutions, Inc. Our product experts will help you choose the right model for your application and budget. Contact us now: (888) 257-8967

RELATED PRODUCTS

Portable LENTRY Light System model 1OPUPS consists of a 1000 watt generator and a 750-watt halogen light (producing 19,500 lumens). Shown here with the three independently adjustable legs and standard height telescoping pole fully extended, this model stands just under 4-feet tall.

Lentry Light Model 1OPUPS

0.00
LENTRY Portable Lighting System model 1OPUPX consists of a 1000 watt generator, a 750 watt halogen light (produces 19,500 lumens), and an XT height pole. When the three independently adjustable legs and telescoping pole are fully extended as shown, the system stands just under 9-feet tall.

Lentry Light Model 1OPUPX

0.00
Portable LENTRY LED model 1SPECS consists of a 1000 watt generator, standard height pole, and a single V-Spec LED (28,000 lumens). While the fully extended three independently adjustable legs and generator are facing left, the fully extended telescoping pole and light head are facing forward.

Lentry Light Model 1SPECS

0.00
Portable Lentry Lighting LED System model 1SPECS-C23 consists of a 1000 watt generator, standard height pole, V-Spec LED (28,000 lumens), and Case C2318. With the three independently adjustable legs and telescoping pole fully extended, the system stands around 4-feet tall and next to V-Spec Case C2318 which holds the LED light head and pole when not in use.

Lentry Light Model 1SPECS-C23

0.00
LENTRY portable light system model 1SPECSS consists of a 1000 watt generator, two standard height poles, and two V-Spec LEDs (each offering 28,000 lumens for 56,000 total lumens). The three independently adjustable legs are fully extended, while one telescoping pole is fully extended and the other pole is fully retracted. Each light head is aimed to the side, in opposite directions.

Lentry Light Model 1SPECSS

0.00