Lentry Light Model 1SPECXX-C34
Dual XT LEDs with Protective Case
1000-watts of power plus two extra tall, highly efficient, independently aiming V-Spec LEDs are included in one portable Lentry® Light System. A military-grade custom V-Spec case C3422 is included to protect the LED light heads. Each light head operates independently with separate on/off switches and cords, can be aimed up or down, rotates over 360-degrees, and can be extended or retracted as desired.
This model is also available with Case C5022, holding both LED heads and both XT height poles, as model 1SPECXX-C50. If no case is needed for storage or transport, then this model is available as model 1SPECXX.
ALL-TERRAIN LEGS. Outward curving, independently adjustable legs made of solid aircraft-grade aluminum, each having an easy-to-grab locking knob for fast, secure adjustments. Legs lift, level and protect the generator. They allow stable, rock-solid stance nearly anywhere while overcoming common obstacles like tall grass, snow, steep hills, standing water, and debris.
1000W HONDA EU1000i GENERATOR*. 900W continuous power. Quiet operation. Lightweight and compact, with top carrying handle. Fuel efficient, with low emissions. Computer-safe, reliable, clean power generation. Low-oil shut off protected.
TWO (2) V-SPEC LED LIGHTS. The V-Spec LED's light is bright while, quite similar to natural sunlight. It uses a combination of flood and spot lights, is instant on/instant-off (no cool down time), long run-times, low operating temperatures, and uses very little power while offering reliability, low maintenance, and solid state electronics (no bulbs to burn out). The lens and optics are molded together for excellent light quality and wide, uniform, far-reaching illumination. Innovative cooling fins are incorporated right into the super-slim head making each light head very compact. Each light has its own on/off switch so they can be run individually or at the same time, and tips far forward and back, while rotating over 360-degrees.
TWO (2) XT HEIGHT POLES. Stands between 8.5- to 9-feet tall with legs and pols fully extended; stands about 4.5-feet tall when totally retracted. This is the most popular height since the lights can be used at any length of the telescoping poles, from fully retracted to fully extended. The poles (and lights) can be disconnected (and reconnected) quickly from the generator/legs portion of the system for transport and storage.
V-SPEC CASE C3422. Rugged, waterproof case holds both V-Spec LED light heads only. The case meets US Military standards for protection against air, water, theft, and impact. Special polyethylene closed-cell foam inside is custom-cut and energy-absorbing; it cushions the LED light heads keeping them from shifting, and will not disintegrate with sun or water.
QUICK RELEASE. Hardware installed on the neck of the light heads allows the LEDs to be connected and disconnected easily from the telescoping poles just by turning a knob.
WARRANTIES. Backed by 1- and 5-year respective warranties on the generator and light head, lifetime warranty on the case, our overall 5-year “No BS” warranty on workmanship and materials, and Lifetime Factory Support.
*Due to EPA and CARB regulations, Honda generators cannot be shipped into California. Businesses and residents of California must purchase the required generator from within the state.
|Model||Lentry Model 1SPECXX-C34 by Ventry Solutions, Inc.|
|Output AC||120V 1000W max. (8.3A) 900W rated (7.5A)
"Rated" means the power the generator can supply continuously to run lights and other tools; “Max” wattage is available for short bursts.
|Output DC||12V 96W (8A)|
|Receptacles||15A 125V Duplex, NEMA 5-15P|
|Fuel Capacity||0.6 gallons (2.4 quarts)|
|Run Times per Tankful (approximate)||3.2 hrs hours @ rated load (900W)
7.1 hours @ 1/4 rated load (225W)
4.5 hours with both V-Spec LED lights on (672W)
|Noise Level||50 dB(A) @ rated load
42 dB(A) @ 1/4 load
|Light Head||V-Spec LED|
|Input||120V 336W (2.8A) each, 372W total|
|Output||28,000 lumens each; 56,000 lumens total|
|Certifications||UL, CE, IP68|
|Number of Telescoping Poles||2|
|Case||V-Spec Case C3422
Holds two V-Spec LED heads
Includes wheels, 4 handles, 5 padlock spots, and 7 latches
|Dimensions (L x W x H)|
|Generator with Legs Retracted||23.5 x 14 x 19.5 inches
(59.06 x 34.93 x 48.9 cm)
|V-Spec LED Light Heads, each||14.5 x 3.5 x 15 inches
(36.83 x 8.89 x 37.47 cm)
|XT Height Poles, each||44 inches (111.76 cm), retracted|
|Case||33.5 x 13 x 22 inches
(85.09 x 33.02 x 55.88 cm)
|Generator and Legs Portion||41 lbs (19 kg), dry
up to 45 lbs (20.5 kg) with fuel and oil
|V-Spec LED Light Heads||9.75 lbs (4.5 kg) each
19.5 lbs (9 kg) for both
|XT Height Poles||4.5 lbs (2 kg) each
9 lbs (4 kg) for both
|Case||29.5 lbs (13.5 kg), empty|
|Generator||1 year commercial|
|V-Spec LED Light Head||5 years|
|All Other Components||5 years workmanship and materials + Lifetime Factory Support
|Country of Origin||USA. Lentry Systems are manufactured in Hauser, Idaho USA. Honda generators are not made in the USA but make up less than 50% of their value.|
Out of all available accessories, any of these may be added to model 1SPECXX-C-34.
LED CASE C5022. The lifetime V-Spec Case protects and holds both V-Spec heads and both XT height poles. It is included with Lentry Light model 1SPECXX-C50.
RECEIVER HITCH POLE MOUNT. Alternate mounting option which holds one of the telescoping lights and poles, expanding the versatility and functionality of Lentry Lights.
TRUCK MOUNT. Alternate mounting option which holds one telescoping light and pole firmly to a wall, cabinet door, or side of truck where the light can then serve as both portable and truck-mounted lighting increasing value and function.
TACHOMETER. Digital display shows RPM and total hours on the generator. Helpful for performance report, diagnostics, and maintenance.
CARRYING STRAP. Over-the-shoulder carrying strap of industrial nylon allows allows for hands-free carry of the unit’s generator and legs portion.
Literature to download / print
READY TO BUY?
Prices and products are available from our helpful Dealers and Ventry Solutions, Inc. Our product experts will help you choose the right model for your application and budget. Contact us now: (888) 257-8967