Lentry Light Model 1SPECXX
Portable, Extra Tall, Dual LED Unit
This highly efficient Lentry® Light System gives you 1000-watts of power plus two extra tall, independently aiming V-Spec LEDs in one portable unit. Extend either or both lights, or leave them down as desired. The legs lift the generator up and protect it like a roll-bar when retracted. Light heads aim up, down, and rotate independently, with separate on/off switches and cords.
This model is also available with two different cases. Case C3422 holds the two LED light heads only in model 1SPECXX-C34, while Case C5022 holds both LED heads and both XT height poles in model 1SPECXX-C50.
ALL-TERRAIN LEGS. Outward curving, independently adjustable legs made of solid aircraft-grade aluminum, each having an easy-to-grab locking knob for fast, secure adjustments. Legs lift, level and protect the generator. They allow a stable, rock-solid stance nearly anywhere while overcoming common obstacles like tall grass, snow, steep hills, standing water, and debris.
1000W HONDA EU1000i GENERATOR. 900W continuous power. Quiet operation. Lightweight and compact, with top carrying handle. Fuel efficient, with low emissions. Computer-safe, reliable, clean power generation. Low-oil shut off protected.
TWO (2) V-SPEC LED LIGHTS. The V-Spec LED's light bright white, quite similar to natural sunlight. It uses a combination of flood and spot lights, is instant-on/instant-off (no cool down time), long run-times, low operating temperatures, and uses very little power while offering reliability, low maintenance, and solid state electronics (no bulbs to burn out). The lens and optics are molded together for excellent light quality and wide, uniform, far-reaching illumination. Innovative cooling fins are incorporated right into the super-slim head making each light head very compact. Each light has its own on/off switch so they can be run individually or at the same time, and tips far forward and back, while rotating over 360-degrees.
TWO (2) XT HEIGHT POLES. Stands between 8.5- to 9-feet tall with legs and poles fully extended; stands about 3-feet high when totally retracted. this is the most popular hight since the lights can be used at any length of the telescoping poles, from fully retracted to fully extended. The poles disconnect (and reconnect) quickly from the generator/legs portion of the system for transport and storage.
QUICK RELEASE. Hardware installed on the neck of the light allows the light head to be connected and disconnected easily from the telescoping pole just by turning a knob.
WARRANTIES. Backed by 1- and 5-year respective warranties on the generator and light heads, our overall 5-year “No BS” warranty on workmanship and materials, and Lifetime Factory Support.
|Model||Lentry Model 1SPECXX by Ventry Solutions, Inc.|
|Output AC||120V 1000W max. (8.3A) 900W rated (7.5A)
"Rated" means the power the generator can supply continuously to run lights and other tools; “Max” wattage is available for short bursts.
|Output DC||12V 96W (8A)|
|Receptacles||15A 125V Duplex, NEMA 5-15P|
|Fuel Capacity||0.6 gallons (2.4 quarts)|
|Run Times per Tankful (approximate)||3.2 hrs hours @ rated load (900W)
7.1 hours @ 1/4 rated load (225W)
4.5 hours with both V-Spec LED lights on (672W)
|Noise Level||50 dB(A) @ rated load
42 dB(A) @ 1/4 load
|Light Head||V-Spec LED|
|Input||120V 336W (2.8A) each, 372W total|
|Output||28,000 lumens each; 56,000 lumens total|
|Certifications||UL, CE, IP68|
|Number of Telescoping Poles||2|
|Dimensions (L x W x H)|
|Generator with Legs Retracted||23.5 x 13.75 x 24 inches
(60.96 x 33.66 x 48.9 cm)
|V-Spec LED Light Heads, each||14.5 x 3.5 x 15 inches
(36.83 x 8.89 x 37.47 cm)
|XT Height Poles, each||44 inches (111.76 cm), retracted|
|Generator and Legs Portion||41 lbs (19 kg), dry
up to 44 lbs (20.5 kg) with fuel and oil
|V-Spec LED Light Heads||9.75 lbs (4.5 kg), each
19.5 lbs (9 kg) for both
|XT Height Poles||4.5 lbs (2 kg), each
9 lbs (4 kg) for both
|Generator||1 year commercial|
|V-Spec LED Light Head||5 years|
|All Other Components||5 years workmanship and materials + Lifetime Factory Support
|Country of Origin||USA. Lentry Systems are manufactured in Hauser, Idaho USA. Honda generators are not made in the USA but make up less than 50% of their value.|
Out of all available Accessories, any of these may be added to model 1SPECXX.
LED CASE C5022. The lifetime V-Spec Case protects and holds both V-Spec LED light heads and both XT height poles. It is included with Lentry Light model 1SPECXX-C50.
RECEIVER HITCH POLE MOUNT. Alternate mounting option which holds one of the telescoping lights and poles, expanding the versatility and functionality of Lentry Lights.
TRUCK MOUNT. Alternate mounting option which holds one telescoping light and pole firmly to a wall, cabinet door, or side of truck where the light can then serve as both portable and truck-mounted lighting increasing value and function.
TACHOMETER. Digital display shows RPM and total hours on the generator. Helpful for performance report, diagnostics, and maintenance.
CARRYING STRAP. Over-the-shoulder carrying strap of industrial nylon allows allows for hands-free carry of the unit’s generator and legs portion.
Literature to download / print
READY TO BUY?
Prices and products are available from our helpful Dealers and Ventry Solutions, Inc. Our product experts will help you choose the right model for your application and budget. Contact us now: (888) 257-8967