Lentry Light Model 2SPECXX-C50
Dual XT LED with Large Case
Light any job site or emergency scene quickly with this extremely bright Lentry® Lighting System. Two highly efficient, XT-height LEDs are powered by a 2200W generator, leaving enough power to run other tools. This system also includes a military-grade case to store the LEDs and poles.
This system is also available with Case C3422, holding the two LED light heads only, as model 2SPECXX-C34. If not case is needed for storage or transport, then this model is available as model 2SPECXX.
ALL-TERRAIN LEGS. Outward curving, independently adjustable legs made of solid aircraft-grade aluminum, each having an easy-to-grab locking knob for fast, secure adjustments. Legs lift, level and protect the generator. They allow a secure, rock-solid stance nearly anywhere, while overcoming common obstacles like tall grass, snow, steep hills, standing water, and debris.
2200W HONDA EU22000i GENERATOR. 1800W continuous power. Quiet operation. Lightweight and compact, with top carrying handle. Fuel efficient, with long run times and low emissions. Computer-safe, reliable power generation. Low-oil shut off protected.
TWO (2) V-SPEC LED LIGHTS. The V-Spec LED's light is bright while, quite similar to natural sunlight. The use a combination of flood and spot lights, are instant on/instant-off (no cool down time), have long run-times, low operating temperatures, and use very little power, while offering reliability, low maintenance, and solid state electronics (no bulbs to burn out). The lens and optics are molded together for excellent light quality and wide, uniform, far-reaching illumination. Innovative cooling fins are incorporated right into the super-slim head making each light head very compact. Each light has it's own on/off switch so they can be run one at a time or at once, while being able to tip far forward and back and rotate 450-degrees.
TWO (2) XT HEIGHT POLES. Stands 8.5- to 9-feet tall with legs and pole fully extended; stands about 3-feet tall totally retracted. This is the mos popular height since the light can be used at any length of the telescoping pole, from fully retracted to fully extended. The poles (and lights) can e disconnected (and reconnected) quickly from the generator/legs portion of the system for transport and storage.
V-SPEC CASE C5022. Rugged, waterproof case holds both V-Spec LED light heads and both XT height poles. The case meets US Military standards for protection against air, water, theft, and impact. Special polyethylene closed-cell foam inside is custom-cut and energy-absorbing; it cushions the LED light heads, keeping it from shifting, and will not disintegrate with sun or water.
QUICK RELEASE. Hardware installed on the neck of the light heads allows the LEDs to be connected and disconnected easily from the telescoping poles just by turning a knob.
WARRANTIES. Backed by 3- and 5-year respective warranties on the generator and light head, lifetime warranty on the case, our overall 5-year “No BS” warranty on workmanship and materials, and Lifetime Factory Support.
|Model||Lentry Model 2SPECXX-C50 by Ventry Solutions, Inc.|
|Output AC||120V 2200W max. (18.3A) 1800W rated (15A)
"Rated" means the power the generator can supply continuously to run lights and other tools; “Max” wattage is available for short bursts.
|Output DC||12V 100W (8.3A)|
|Receptacles||20A 125V Duplex, NEMA 5-20P|
|Fuel Capacity||0.95 gallons (3.8 quarts)|
|Run Times per Tankful (approximate)||3.2 hours @ rated load (1800W)
8.1 hours @ 1/4 rated load (450W)
7.1 hours with both V-Spec lights on (672W)
|Noise Level||57 dB(A) @ rated load
48 dB(A) @ 1/4 load
|Light Head||V-Spec LED|
|Input||120V 336W (2.8A) each, 672W total|
|Output||28,000 lumens each; 56,000 lumens total|
|Certifications||UL, CE, IP68|
|Number of Telescoping Poles||2|
|Case||V-Spec Case C5022
Holds both V-Spec LED light heads and both XT height poles
Includes wheels, 2 handles, 6 padlock spots, and 8 latches
|Dimensions (L x W x H)|
|Generator with Legs Retracted||27 x 16.5 x 21 inches
(68.58 x 41.28 x 52.71 cm)
|V-Spec LED Light Heads, each||14.5 x 3.5 x 15 inches
(36.83 x 8.89 x 34.47 cm)
|XT Height Poles, each||44 inches (111.76 cm), retracted|
|Case||49.5 x 9 x 21.5 inches
(125.73 x 22.86 x 54.61 cm)
|Generator and Legs Portion||61 lbs (27.5 kg), dry
up to 68 lbs (30.5 kg) with fuel and oil
|V-Spec LED Light Heads||9.75 lbs (4.5 kg), each
19.5 lbs (9 kg) for both
|XT Height Poles||4.5 lbs (2 kg), each
9 lbs (4 kg) for both
|Case||30.5 lbs (14 kg), empty|
|Generator||3 years commercial|
|V-Spec LED Light Head||5 years|
|All Other Components||5 years workmanship and materials + Lifetime Factory Support
|Country of Origin||USA. Lentry Systems are manufactured in Hauser, Idaho USA. Honda generators are not made in the USA but make up less than 50% of their value.|
Out of all available accessories, any of these may be added to model 2SPECXX-C50.
RECEIVER HITCH POLE MOUNT. Alternate mounting option which holds one of the telescoping lights and poles, expanding the versatility and functionality of Lentry Lights.
TRUCK MOUNT. Alternate mounting option which holds one telescoping light and pole firmly to a wall, cabinet door, or side of truck where the light can then serve as both portable and truck-mounted lighting increasing value and function.
TACHOMETER. Digital display shows RPM and total hours on the generator. Helpful for performance report, diagnostics, and maintenance.
Literature to download / print
READY TO BUY?
Prices and products are available from our helpful Dealers and Ventry Solutions, Inc. Our product experts will help you choose the right model for your application and budget. Contact us now: (888) 257-8967