1STARS LENTRY V-Star LED Lighting System fully extended

Lentry Light Model 1STARS

  • 0.00

Compact Lentry® LED Light and Power Unit with the lowest-draw, standard height 20,000 lumen V-Star LED. Capable of raising over common obstacles like tall grass, brush, and snow banks to light your task. 1STARS takes no time to deploy and will run for 7 hours on a little over half a gallon of gas.

NOTE: Customers will need to provide the generator for any Lentry Lighting System purchase. Lentry Legs easily bolt on to the generator and easy-to-follow instructions will be provided.

ALL-TERRAIN LEGS. Outward curving, independently adjustable legs made of solid aircraft-grade aluminum, each having an easy-to-grab locking knob for fast, secure adjustments. Legs lift, level and protect the generator. They allow a stable, rock-solid stance nearly anywhere while overcoming common obstacles like tall grass, snow, steep hills, standing water, and debris.

1000W HONDA EU1000i GENERATOR*. 900W continuous power. Quiet operation. Lightweight and compact, with top carrying handle. Fuel efficient, with low emissions. Computer-safe, reliable, clean power generation. Low-oil shut off protected.

V-STAR LED LIGHT. The V-Star LED offers extremely bright light. It is a combination of flood and spot lights, instant-on/instant/off (no cool down time), long run-times, low operating temperatures, and uses very little power while offering reliability, low maintenance, and solid state electronics (no bulbs to burn out). The V-Star LED has two large, easy-grab handles for ergonomic aiming. The optical reflector is well engineered for consistent, overall illumination. The housing is durable aluminum with stainless steel hardware and a powder-coated finish. The light head pivots forward and back, while rotating over 360-degrees.

STANDARD HEIGHT. Stands between 3.5- to 4-feet tall with legs and pole fully extended, giving you the elevation needed to overcome common obstacles while maintaining maximum portability, convenience, and small storage size. The light head and pole are compact and may be easily stored while remaining connected to the system or can be easily disconnected (and reconnected) quickly from the generator/legs portion of the system.

QUICK RELEASE. Hardware installed on the neck of the light allows the light head to be connected and disconnected easily from the telescoping pole just by turning a knob.

WARRANTIES. Backed by 1- and 6-year respective warranties on the generator and light head, our overall 5-year “No BS” warranty on workmanship and materials, and Lifetime Factory Support.

*The required generator must be purchased from one of our dealers or a local supplier.

Model Lentry Model 1STARS by Ventry Solutions, Inc.
Patent US D684,309
Generator* Honda EU1000i
Output AC 120V 1000W max. (8.3A) 900W rated (7.5A)
"Rated" means the power the generator can supply continuously to run lights and other tools; “Max” wattage is available for short bursts.
Output DC 12V 96W (8A)
Receptacles 15A 125V Duplex, NEMA 5-15P
Fuel Capacity 0.6 gallons (2.4 quarts)
Run Times per Tankful (approximate) 3.2 hrs hours @ rated load (900W)
7.1 hours @ 1/4 rated load (225W)
7.0 hours with V-Star LED light on (240W)
Noise Level 50 dB(A) @ rated load
42 dB(A) @ 1/4 load
Light Head V-Star LED
Input 120V 240W (2A)
Output 20,000 lumens
Certifications UL, CE* (*pending)
Number of Telescoping Poles 1
Dimensions (L x W x H)
Generator* with Legs Retracted 24 x 13.5 x 19.5 inches
(60.96 x 33.66 x 48.9 cm)
V-Star LED Light Head 14 x 5.75 x 14.5 inches
(35.56 x 14.61 x 36.83 cm)
Standard Height Pole 15.25 inches (38.74 cm), retracted
Weights
Generator* and Legs Portion 40 lbs (18.5 kg), dry
up to 44 lbs (20 kg) with fuel and oil
V-Star LED Light Head 12 lbs (5.5 kg)
Standard Height Pole 2 lbs (1 kg)
Warranties
Generator* 1 year commercial
V-Star LED Light Head 6 years
All Other Components 5 years workmanship and materials + Lifetime Factory Support
Country of Origin USA. Lentry Systems are manufactured in Hauser, Idaho USA. Honda generators are not made in the USA but make up less than 50% of their value.
*The required generator must be purchased from one of our dealers or a local supplier.

Out of all available Accessories, any of these may be added to model 1STARS.

RECEIVER HITCH POLE MOUNT. Alternate mounting option which holds one telescoping light and pole, expanding the versatility and functionality of Lentry Lights.

TRUCK MOUNT. Alternate mounting option which holds the telescoping light and pole firmly to a wall, cabinet door, or side of truck. The light can then serve as both portable and truck-mounted lighting increasing value and function.

TACHOMETER. Digital display shows RPM and total hours on the generator. Helpful for performance report, diagnostics, and maintenance.

CARRYING STRAP. Over-the-shoulder carrying strap of industrial nylon allows allows for hands-free carry of the unit’s generator and legs portion.

Portable Lentry Light model 1STARS was very helpful during recovery operations of an overturned crane, as shown here, courtesy of Mahugh Fire & Safety and Bolster Towing (Montana). We also thank the Columbia Falls Fire Department who owns this particular unit. Click the image to enlarge.

Lights for towing and recovery operations, courtesy Mahugh Fire and Bolster Towing, Montana

Literature to download / print

READY TO BUY?

Prices and products are available from our helpful Dealers and Ventry Solutions, Inc. Our product experts will help you choose the right model for your application and budget. Contact us now: (888) 257-8967

RELATED PRODUCTS

Portable LENTRY LED model 1SPECS consists of a 1000 watt generator, standard height pole, and a single V-Spec LED (28,000 lumens). While the fully extended three independently adjustable legs and generator are facing left, the fully extended telescoping pole and light head are facing forward.

Lentry Light Model 1SPECS

0.00
Portable Lentry Lighting LED System model 1SPECS-C23 consists of a 1000 watt generator, standard height pole, V-Spec LED (28,000 lumens), and Case C2318. With the three independently adjustable legs and telescoping pole fully extended, the system stands around 4-feet tall and next to V-Spec Case C2318 which holds the LED light head and pole when not in use.

Lentry Light Model 1SPECS-C23

0.00
LENTRY portable light system model 1SPECSS consists of a 1000 watt generator, two standard height poles, and two V-Spec LEDs (each offering 28,000 lumens for 56,000 total lumens). The three independently adjustable legs are fully extended, while one telescoping pole is fully extended and the other pole is fully retracted. Each light head is aimed to the side, in opposite directions.

Lentry Light Model 1SPECSS

0.00
Lentry Lighting System Model 1SPECSS-C34 consits of a 1000 watt generator, two standard height poles, two V-Spec LEDs (28,000 lumens each), and Case C3422. The system stands with all three individually adjustable legs and one telescoping pole fully extended, while the second telescoping pole is fully retracted. Next to it is a closed case, which stores both light heads when not in use.

Lentry Light Model 1SPECSS-C34

0.00
Portable LENTRY Lighting System Model 1SPECX consists of a 1000 watt generator, V-Spec LED (28,000 lumens) and XT height pole. As shown with the three independently adjustable legs and telescoping pole fully extended, this system stands up-to 9-feet tall.

Lentry Light Model 1SPECX

0.00