Lentry Light Model 1SPECSS
Two separate, standard height, telescoping V-Spec LEDs are partnered with a 1000 watt generator on this dual-LED Lentry® System.
Both poles connect and disconnect from the rest of the unit easily and the light heads aim and operate independently. These shorter lights are tall enough for overcoming common obstacles like bushes and guard rails. Their size makes them practical to leave connected to the generator portion of the unit for easy storage. Enjoy close to 360 degrees of light with these two impressive LEDs.
This unit is available with a protective case for the LEDs and quick-release hardware as model 1SPECSS-C.
ALL-TERRAIN VERSATILITY. Outward curving legs of solid aircraft-grade aluminum. Legs lift, level and protect the generator. They allow setup nearly anywhere and ensure stable, solid operation. With legs, the light system overcomes common obstacles like tall grass, snow, standing water.
SUPER-QUIET 1000W HONDA EU1000i GENERATOR. 900W continuous power. Quiet operation. Lightweight and compact, with top carrying handle. Fuel efficient, with low emissions. Computer-safe, reliable power generation. Low-oil shut off protected.
TWO (2) V-SPEC LED LIGHTS. V-Spec LEDs output bright white light, as close to sunlight as you can get with a man-made light! V-Specs offer instant-on at full intensity, long run-times, low operating temperatures, longevity, reliability, low maintenance, and solid state electronics (no bulbs to burn out). In addition to these features, each V-Spec combines 72 LEDs, with 60 LEDs each operating as flood lights (work area lighting) and 12 LEDs providing focused spot lighting for distance. The lens and optics are molded together for excellent light quality and wide, uniform, far-reaching illumination. Innovative cooling fins are incorporated right into the super-slim head making each light head very compact. Each light has its own on/off switch so they can be run individually or both at once. Each light head tips far forward and back and rotates all the way around.
TWO (2) STANDARD HEIGHT POLES. Good balance of height and convenience. Approximately 4 feet tall with legs and poles fully extended, you have the elevation needed to overcome common obstacles while maintaining maximum portability, convenience, and small storage size. The lights can be aimed in matching or different directions for twice the reach. The poles disconnect from the rest of the unit, so you can grab one or both as needed.
QUICK RELEASE. Hardware installed on the neck of the light allows the light head to be connected and disconnected easily from the telescoping pole just by turning a knob.
WARRANTIES. Backed by 1- and 5-year respective warranties on the generator and light heads, our overall 5-year “No BS” warranty on workmanship and materials, and Lifetime Factory Support.
|Model||LENTRY Model 1SPECSS by Ventry Solutions, Inc.|
|Generator Output AC||120V 1000W max. (8.3A) 900W rated (7.5A)
"Rated" means the power the generator can supply continuously to run lights and other tools; “Max” wattage is available for short bursts.
|Number of Telescoping Lights||2|
|Light Head||V-Spec LED|
|Light Input||120V 336W (2.8A) each, 672W total|
|Light Output||28,000 lumens each; 56,000 lumens total|
|Receptacles||15A 125V Duplex, NEMA 5-15P|
|Generator Output DC||12V 96W (8A)|
|Fuel Capacity||0.6 gallons (2.4 quarts)|
|Run Times per Tankful (approximate)||3.2 hrs hours @ rated load (900W)
7.1 hours @ 1/4 rated load (225W)
4.5 hours with both V-Spec LED lights on (672W)
|Noise Level||50 dB(A) @ rated load
42 dB(A) @ 1/4 load
|Light Certifications||UL, CE, IP68|
|Generator with Legs Retracted
(L x W x H)
|23.5 x 13.75 x 20 inches|
|V-Spec LED Light Head
(L x W x H)
|14.5 x 3.5 x 14.75 inches|
|Standard Height Pole||15.25 inches, retracted|
|Generator and Legs Portion (dry)||41 lbs|
|V-Spec LED Light Head and Standard Pole||11.63 lbs each; 23.26 lbs for both|
|Fuel and Oil add…||4 lbs|
|Generator||1 year commercial|
|V-Spec LED Light Head||5 years|
|All Other Components||5 years workmanship and materials + Lifetime Factory Support
|Country of Origin||USA. LENTRY Systems are manufactured in Hauser, Idaho USA. Honda generators are not made in the USA but make up less than 50% of their value.|
|Downloads (PDFs)||LENTRY Light System Model 1SPECSS bid specs
Specifications for all models on one sheet
Out of all available Accessories, any of these may be added to model 1SPECSS.
LED CASE. The lifetime V-Spec Case protects and holds the V-Spec LED head and the standard height pole. It is included with Lentry Light Model 1SPECSS-C.
RECEIVER HITCH POLE MOUNT. Alternate mounting option which holds one of the telescoping lights and poles, expanding the versatility and functionality of Lentry Lights.
TRUCK MOUNT. Alternate mounting option which holds one telescoping light and pole firmly to a wall, cabinet door, or side of truck where the light can then serve as both portable and truck-mounted lighting increasing value and function.
TACHOMETER. Digital display shows RPM and total hours on the generator. Helpful for performance report, diagnostics, and maintenance.
CARRYING STRAP. Over-the-shoulder carrying strap of industrial nylon allows allows for hands-free carry of the unit’s generator and legs portion.
READY TO BUY?
Prices and products are available from our helpful Dealers and Ventry Solutions, Inc. Our product experts will help you choose the right model for your application and budget. Contact us now: (888) 257-8967