Lentry Light Model 1SPECX-C23
Portable LED Scene Light with Case
This Lentry® Light model has an extremely bright LED, the XT height advantages (able to stand nearly 9 feet tall), the most compact generator, and case C2318 for storage of the LED. The case will protect the LED light head, add security, and keep it in new condition, use after use.
ALL-TERRAIN LEGS. Outward curving, independently adjustable legs made of solid aircraft-grade aluminum, each having an easy-to-grab locking knob for fast, secure adjustments. Legs lift, level and protect the generator. They allow a stable, rock-solid stance nearly anywhere while overcoming common obstacles like tall grass, snow, steep hills, standing water, and debris.
1000W HONDA EU1000i GENERATOR*. 900W continuous power. Quiet operation. Lightweight and compact, with top carrying handle. Fuel efficient, with low emissions. Computer-safe, reliable, clean power generation. Low-oil shut off protected.
V-SPEC LED LIGHT. The V-Spec LED’s light is bright white, quite similar to natural sunlight. It uses a combination of flood and spot lights, is instant-on/instant-off (no cool down time), long run-times, low operating temperatures, and uses very little power while offering reliability, low maintenance, and solid state electronics (no bulbs to burn out). The lens and optics are molded together for excellent light quality and wide, uniform, far-reaching illumination. Innovative cooling fins are incorporated right into the super-slim head making it very compact. The light head pivots far forward and back, while rotating over 360-degrees.
XT HEIGHT POLE. Stands between 8.5- to 9-feet tall with legs and pole fully extended; stands about 3 feet tall when fully retracted. This is the most popular height since the light can be used at any length of the telescoping pole, from fully retracted to fully extended. The pole (and light) can be disconnected (and reconnected) quickly from the generator/legs portion of the system for transport and storage.
V-SPEC CASE C2318. Rugged, waterproof case holds the V-Spec LED light head. The case meets US Military standards for protection against air, water, theft, and impact. Special polyethylene closed-cell foam inside is custom-cut and energy-absorbing; it cushions the LED light head, keeping it from shifting, and will not disintegrate with sun or water.
QUICK RELEASE. Hardware installed on the neck of the telescoping light allows the light head to be connected and disconnected easily from the telescoping pole just by turning a knob.
WARRANTIES. Backed by 1- and 5-year respective warranties on the generator and light head, lifetime warranty on the case, our overall 5-year “No BS” warranty on workmanship and materials, and Lifetime Factory Support.
*Due to EPA and CARB regulations, Honda generators cannot be shipped into California. Businesses and residents of California must purchase the required generator from within the state.
|Model||Lentry Model 1SPECX-C23 by Ventry Solutions, Inc.|
|Output AC||120V 1000W max. (8.3A) 900W rated (7.5A)
"Rated" means the power the generator can supply continuously to run lights and other tools; “Max” wattage is available for short bursts.
|Output DC||12V 96W (8A)|
|Receptacles||15A 125V Duplex, NEMA 5-15P|
|Fuel Capacity||0.6 gallons (2.4 quarts)|
|Run Times per Tankful (approximate)||3.2 hrs hours @ rated load (900W)
7.1 hours @ 1/4 rated load (225W)
6.5 hours with V-Spec LED light on (336W)
|Noise Level||50 dB(A) @ rated load
42 dB(A) @ 1/4 load
|Light Head||V-Spec LED|
|Input||120V 336W (2.8A)|
|Certifications||UL, CE, IP68|
|Number of Telescoping Poles||1|
|Case||V-Spec Case C2318
Holds the V-Spec LED head
Includes 2 handles, 2 padlock spots, and 2 latches
|Dimensions (L x W x H)|
|Generator with Legs Retracted||24 x 13.5 x 20 inches
(60.96 x 33.66 x 48.9 cm)
|V-Spec LED Head||14.5 x 3.5 x 15 inches
(36.83 x 8.89 x 37.47 cm)
|XT Height Pole||44 inches (111.76 cm), retracted|
|Case||22.5 x 8.5 x 18 inches
(57.15 x 21.59 x 45.72 cm)
|Generator and Legs Portion||40 lbs (88.18 kg), dry
up to 44 lbs (96.8 kg) with fuel and oil
|V-Spec LED Light Head||9.75 lbs (21.49 kg)|
|XT Height Pole||4.5 lb (9.92 kg)|
|Case||11.5 lbs (25.35 kg), empty|
|Generator||1 year commercial|
|V-Spec LED Light Head||5 years|
|All Other Components||5 years workmanship and materials + Lifetime Factory Support
|Country of Origin||USA. Lentry Systems are manufactured in Hauser, Idaho USA. Honda generators are not made in the USA but make up less than 50% of their value.|
Out of all available Accessories, any of these may be added to model 1SPECX-C.
RECEIVER HITCH POLE MOUNT. Alternate mounting option which holds one telescoping light and pole, expanding the versatility and functionality of Lentry Lights.
TRUCK MOUNT. Alternate mounting option which holds the telescoping light and pole firmly to a wall, cabinet door, or side of truck. The light can then serve as both portable and truck-mounted lighting increasing value and function.
TACHOMETER. Digital display shows RPM and total hours on the generator. Helpful for performance report, diagnostics, and maintenance.
CARRYING STRAP. Over-the-shoulder carrying strap of industrial nylon allows allows for hands-free carry of the unit’s generator and legs portion.
Literature to download / print
READY TO BUY?
Prices and products are available from our helpful Dealers and Ventry Solutions, Inc. Our product experts will help you choose the right model for your application and budget. Contact us now: (888) 257-8967