Lentry Light Model 2STARXXX
Triple LED XT
2200 watt Lentry® Lighting System with three V-Star LED light heads on separate XT height poles. The poles connect and disconnect from the rest of the unit easily and the light heads aim and operate independently. Use one at a time, two, or all three at once. Each has its own cord, so included with this model is an outlet adaptor which plugs into one of the generator’s two outlets and splits it, thereby providing three outlets for the lights.
ALL-TERRAIN LEGS. Outward curving, independently adjustable legs made of solid aircraft-grade aluminum, each having an easy-to-grab locking knob for fast, secure adjustments. Legs lift, level and protect the generator. They allow a secure, rock-solid stance nearly anywhere, while overcomes common obstacles like tall grass, snow, steep hills, standing water, and debris.
2200W HONDA EU2200i GENERATOR*. 1800W continuous power. Quiet operation. Lightweight and compact, with top carrying handle. Fuel efficient, with long run times and low emissions. Computer-safe, reliable, clean power generation. Low-oil shut off protected.
THREE (3) V-STAR LED LIGHTS. V-Star LEDs offer an extremely bright light. They are a combination of floor and spot lights, are instant-on/instant-off (no cool down time), have long run-times, low operating temperatures, and use very little power, while offering reliability, low maintenance, and solid state electronics. Each V-Star LED has two large, easy-grab handles for ergonomic aiming. The optical reflectors are well engineered for consistent, overall illumination and the housings are durable aluminum with stainless steel hardware and powder-coated finishes. Each light has its own on/off switch so they can be run individually or at the same time, and tips forward and back, while rotating over 360-degrees.
THREE (3) XT HEIGHT POLES. Stands between 8.5- to 9-feet tall with legs and poles fully extended; stands about 3-feet tall when totally retracted. This is the most popular height since the lights can e used at any length of the telescoping poles, from fully retracted to fully extended. The poles (and lights) can be disconnected (and reconnected) quickly from the generator/legs portion of the system for transport and storage.
QUICK RELEASE. Hardware installed on the neck of the light allows the light head to be connected and disconnected easily from the telescoping pole just by turning a knob.
WARRANTIES. Backed by 3- and 6-year respective warranties on the generator and light heads, our overall 5-year “No BS” warranty on workmanship and materials, and Lifetime Factory Support.
*Due to EPA and CARB regulations, Honda generators cannot be shipped into California. Businesses and residents of California must purchase the required generator from within the state.
|Model||Lentry Model 2STARXXX by Ventry Solutions, Inc.|
|Output AC||120V 2200W max. (18.3A) 1800W rated (15A)
"Rated" means the power the generator can supply continuously to run lights and other tools; “Max” wattage is available for short bursts.
|Output DC||12V 100W (8.3A)|
|Receptacles||20A 125V Duplex, NEMA 5-20P|
|Fuel Capacity||0.95 gallons (3.8 quarts)|
|Run Times per Tankful (approximate)||3.2 hours @ rated load (1800W)
7.9 hours @ 1/4 rated load (450W)
6.9 hours with all three V-Star lights on (720W)
|Light Head||V-Star LED|
|Input||120V 240W (2A) each; 720W total|
|Output||20,000 lumens each; 60,000 lumens total|
|Certifications||UL, CE* (*pending)|
|Number of Telescoping Poles||3|
|Dimensions (L x W x H)|
|Generator with Legs Retracted||27 x 16.5 x 21 inches
(68.58 x 41.28 x 52.71 cm)
|V-Star LED Light Heads, each||14 x 5.75 x 14.5 inches
(35.56 x 14.61 x 36.83 cm)
|XT Height Poles, each||44 inches (111.76 cm), retracted|
|Generator and Legs Portion||62 lbs (28.12 kg), dry
up to 70 lbs (31.5 kg) with fuel and oil
|V-Star LED Light Heads||12 lbs (5.5 kg), each
36 lbs (16.5 kg) for all three
|XT Height Poles||4.5 lbs (2 kg), each
13.5 lbs (6 kg) for all three
|Generator||3 years commercial|
|V-Star LED Light Head||6 years|
|All Other Components||5 years workmanship and materials + Lifetime Factory Support
|Country of Origin||USA. Lentry Systems are manufactured in Hauser, Idaho USA. Honda generators are not made in the USA but make up less than 50% of their value.|
Out of all available Accessories, any of these may be added to model 2STARXXX.
RECEIVER HITCH POLE MOUNT. Alternate mounting option which holds one of the telescoping lights and poles, expanding the versatility and functionality of Lentry Lights.
TRUCK MOUNT. Alternate mounting option which holds one telescoping light and pole firmly to a wall, cabinet door, or side of truck where the light can then serve as both portable and truck-mounted lighting increasing value and function.
TACHOMETER. Digital display shows RPM and total hours on the generator. Helpful for performance report, diagnostics, and maintenance.
Literature to download / print
READY TO BUY?
Prices and products are available from our helpful Dealers and Ventry Solutions, Inc. Our product experts will help you choose the right model for your application and budget. Contact us now: (888) 257-8967