Lentry Light Model 2OPUPH
Hi-Lite Portable Lighting System
The Hi-Lite height Lentry® Light for flagger and specialty job lighting has an Optup Halogen light and stands up to 13-feet tall and a powerful 2200-watt generator. This super tall work light is intended specifically for lighting flaggers but also works well for additional special applications requiring an extremely tall light.
Due to the height, all Hi-Lite Lentry Lighting Systems are special order, as Ventry Solutions, Inc. (the manufacturer) would like to make sure this height is appropriate for the application it will be used for.
ALL-TERRAIN LEGS. Outward curving, independently adjustable legs made of solid aircraft-grade aluminum, each having an easy-to-grab locking knob for fast, secure adjustments. Legs lift, level and protect the generator. They allow a stable, rock-solid stance nearly anywhere, while overcoming common obstacles like tall grass, snow, steep hills, standing water, and debris.
2200W HONDA EU2200i GENERATOR*. 1800W continuous power. Quiet operation. Lightweight and compact, with top carrying handle. Fuel efficient, with long run times and low emissions. Computer-safe, reliable, clean power generation. Low-oil shut off protected.
750W OPTUP HALOGEN LIGHT. Shape and reflective internal surface direct light effectively onto the scene and work surface. It's light is uniform and far-reaching. The light head pivots forward and back, while rotating over 360-degrees.
HI-LITE HEIGHT. Stands up to 13-feet tall with legs and pole fully extended; stands over 6-feet tall fully retracted. This height is ideal for very specific applications requiring certain heights over 12 feet. The pole (and light) can be disconnected (and reconnected) easily from the generator/legs portion of the system for transport and storage. Due to the size, two people are recommended for setting up/disassembling this system.
QUICK RELEASE. Hardware installed on the neck of the light allows the light head to be connected and disconnected easily from the telescoping pole just by turning a knob.
WARRANTIES. Backed by 3- and 2-year respective warranties on the generator and light head, our overall 5-year “No BS” warranty on workmanship and materials, and Lifetime Factory Support.
*Due to EPA and CARB regulations, Honda generators cannot be shipped into California. Businesses and residents of California must purchase the required generator from within the state.
|Model||Lentry Model 2OPUPH by Ventry Solutions, Inc.|
|Output AC||120V 2200W max. (18.3A) 1800W rated (15A)
"Rated" means the power the generator can supply continuously to run lights and other tools; “Max” wattage is available for short bursts.
|Output DC||12V 100W (8.3A)|
|Receptacles||20A 125V Duplex NEMA 5-20P|
|Fuel Capacity||0.95 gallons (3.8 qts)|
|Run Times per Tankful (approximate)||3.2 hours @ rated load (1800W)
7.9 hours @ 1/4 rated load (450W)
6.8 hours with Optup light on (750W)
|Noise Level||57 dB(A) @ rated load
48 dB(A) @ 1/4 load
|Light Head||Optup Halogen|
|Input||120V 750W (6.3A)|
|Number of Telescoping Poles||1|
|Dimensions (L x W x H)|
|Generator with Legs Retracted||27 x 15 x 21 inches
(68.58 x 37.47 x 52.71 cm)
|Optup Halogen Light Head||9 x 6.5 x 13 inches
22.23 x 16.51 x 33.02 cm)
|Hi-Lite Height Pole||73 inches (138.5 cm), retracted|
|Generator and Legs Portion||59 lbs (26.5 kg), dry
up to 66 lbs (30 kg) with fuel and oil
|Optup Light Head||6.5 lbs (3 kg)|
|Hi-Lite Height Pole||6.5 lbs (3 kg)|
|Generator||3 years commercial|
|Optup Light Head||2 years|
|All Other Components||5 years workmanship and materials + Lifetime Factory Support. Halogen bulbs are not covered under warranty.|
|Country of Origin||USA. Lentry Systems are manufactured in Hauser, Idaho USA. Honda generators are not made in the USA but make up less than 50% of their value.|
Out of all available Accessories, any of these may be added to model 2OPUPH.
RECEIVER HITCH POLE MOUNT Alternate mounting option which holds one telescoping light and pole, expanding the versatility and functionality of Lentry Lights.
TRUCK MOUNT Alternate mounting option which holds the telescoping light and pole firmly to a wall, cabinet door, or side of truck. The light can then serve as both portable and truck-mounted lighting increasing value and function.
TACHOMETER Digital display shows RPM and total hours on the generator. Helpful for performance report, diagnostics, and maintenance.
WHEEL & HANDLE KIT Adds greater portability to all Lentry Models that consist of a 2000W/2200W generator and a single pole/light. Includes wheels & a vertical handle for one-person transport, as well as side handles for two-person carry.
SPARE BULB: 750W HALOGEN Keeping a spare bulb on hand is recommended. Output of 19,600 lumens using only 750W. This bulb replaces the 650W bulbs used prior to 2015.
Literature to download / print
READY TO BUY?
Prices and products are available from our helpful Dealers and Ventry Solutions, Inc. Our product experts will help you choose the right model for your application and budget. Contact us now: (888) 257-8967