Lentry Dual LED Lighting System Model 2SPECXX-C50 shown fully extended and standing next to it's included Case C5022, which stores both LED light heads and both XT height poles.

Lentry Light Model 2SPECXX-C50

  • 0.00

Dual XT LED with Large Case

Light any job site or emergency scene quickly with this extremely bright Lentry® Lighting System. Two highly efficient, XT-height LEDs are powered by a 2200W generator, leaving enough power to run other tools. This system also includes a military-grade case to store the LEDs and poles.

This system is also available with Case C3422, holding the two LED light heads only, as model 2SPECXX-C34. If not case is needed for storage or transport, then this model is available as model 2SPECXX.

NOTE: Customers need to provide the generator required for any Lentry Lighting System purchase. Lentry Legs easily bolt on to the generator and easy-to-follow instructions will be provided.

ALL-TERRAIN LEGS. Outward curving, independently adjustable legs made of solid aircraft-grade aluminum, each having an easy-to-grab locking knob for fast, secure adjustments. Legs lift, level and protect the generator. They allow a secure, rock-solid stance nearly anywhere, while overcoming common obstacles like tall grass, snow, steep hills, standing water, and debris.

2200W HONDA EU22000i GENERATOR*. 1800W continuous power. Quiet operation. Lightweight and compact, with top carrying handle. Fuel efficient, with long run times and low emissions. Computer-safe, reliable, clean power generation. Low-oil shut off protected.

TWO (2) V-SPEC LED LIGHTS. The V-Spec LED's light is bright while, quite similar to natural sunlight. The use a combination of flood and spot lights, are instant on/instant-off (no cool down time), have long run-times, low operating temperatures, and use very little power, while offering reliability, low maintenance, and solid state electronics (no bulbs to burn out). The lens and optics are molded together for excellent light quality and wide, uniform, far-reaching illumination. Innovative cooling fins are incorporated right into the super-slim head making each light head very compact. Each light has it's own on/off switch so they can be run individually or at the same time, and tips far forward and back, while rotating over 360-degrees.

TWO (2) XT HEIGHT POLES. Stands 8.5- to 9-feet tall with legs and pole fully extended; stands about 4.5-feet tall totally retracted. This is the mos popular height since the light can be used at any length of the telescoping pole, from fully retracted to fully extended. The poles (and lights) can e disconnected (and reconnected) quickly from the generator/legs portion of the system for transport and storage.

V-SPEC CASE C5022. Rugged, waterproof case holds both V-Spec LED light heads and both XT height poles. The case meets US Military standards for protection against air, water, theft, and impact. Special polyethylene closed-cell foam inside is custom-cut and energy-absorbing; it cushions the LED light heads, keeping it from shifting, and will not disintegrate with sun or water.

QUICK RELEASE. Hardware installed on the neck of the light heads allows the LEDs to be connected and disconnected easily from the telescoping poles just by turning a knob.

WARRANTIES. Backed by 3- and 5-year respective warranties on the generator and light head, lifetime warranty on the case, our overall 5-year “No BS” warranty on workmanship and materials, and Lifetime Factory Support.

*The required generator must be purchased from one of our dealers or a local supplier.

Model Lentry Model 2SPECXX-C50 by Ventry Solutions, Inc.
Patent US D684,309
Generator* Honda EU2000i
Output AC 120V 2200W max. (18.3A) 1800W rated (15A)
"Rated" means the power the generator can supply continuously to run lights and other tools; “Max” wattage is available for short bursts.
Output DC 12V 100W (8.3A)
Receptacles 20A 125V Duplex, NEMA 5-20P
Fuel Capacity 0.95 gallons (3.8 quarts)
Run Times per Tankful (approximate) 3.2 hours @ rated load (1800W)
8.1 hours @ 1/4 rated load (450W)
7.1 hours with both V-Spec lights on (672W)
Noise Level 57 dB(A) @ rated load
48 dB(A) @ 1/4 load
Light Head V-Spec LED
Input 120V 336W (2.8A) each, 672W total
Output 28,000 lumens each; 56,000 lumens total
Certifications UL, CE, IP68
Number of Telescoping Poles 2
Case V-Spec Case C5022
Holds both V-Spec LED light heads and both XT height poles
Includes wheels, 2 handles, 6 padlock spots, and 8 latches
Dimensions (L x W x H)
Generator* with Legs Retracted 27 x 16.5 x 21 inches
(68.58 x 41.28 x 52.71 cm)
V-Spec LED Light Heads, each 14.5 x 3.5 x 15 inches
(36.83 x 8.89 x 34.47 cm)
XT Height Poles, each 44 inches (111.76 cm), retracted
Case 49.5 x 9 x 21.5 inches
(125.73 x 22.86 x 54.61 cm)
Weights
Generator* and Legs Portion 61 lbs (27.5 kg), dry
up to 68 lbs (30.5 kg) with fuel and oil
V-Spec LED Light Heads 9.75 lbs (4.5 kg), each
19.5 lbs (9 kg) for both
XT Height Poles 4.5 lbs (2 kg), each
9 lbs (4 kg) for both
Case 30.5 lbs (14 kg), empty
Warranties
Generator* 3 years commercial
V-Spec LED Light Head 5 years
Case Lifetime
All Other Components 5 years workmanship and materials + Lifetime Factory Support
Country of Origin USA. Lentry Systems are manufactured in Hauser, Idaho USA. Honda generators are not made in the USA but make up less than 50% of their value.
*The required generator must be purchased from one of our dealers or a local supplier.

Out of all available accessories, any of these may be added to model 2SPECXX-C50.

RECEIVER HITCH POLE MOUNT. Alternate mounting option which holds one of the telescoping lights and poles, expanding the versatility and functionality of Lentry Lights.

TRUCK MOUNT. Alternate mounting option which holds one telescoping light and pole firmly to a wall, cabinet door, or side of truck where the light can then serve as both portable and truck-mounted lighting increasing value and function.

TACHOMETER. Digital display shows RPM and total hours on the generator. Helpful for performance report, diagnostics, and maintenance.

Literature to download / print

READY TO BUY?

Prices and products are available from our helpful Dealers and Ventry Solutions, Inc. Our product experts will help you choose the right model for your application and budget. Contact us now: (888) 257-8967

RELATED PRODUCTS

Portable LENTRY Light System model 1OPUPS consists of a 1000 watt generator and a 750-watt halogen light (producing 19,500 lumens). Shown here with the three independently adjustable legs and standard height telescoping pole fully extended, this model stands just under 4-feet tall.

Lentry Light Model 1OPUPS

0.00
LENTRY Portable Lighting System model 1OPUPX consists of a 1000 watt generator, a 750 watt halogen light (produces 19,500 lumens), and an XT height pole. When the three independently adjustable legs and telescoping pole are fully extended as shown, the system stands just under 9-feet tall.

Lentry Light Model 1OPUPX

0.00
Portable LENTRY LED model 1SPECS consists of a 1000 watt generator, standard height pole, and a single V-Spec LED (28,000 lumens). While the fully extended three independently adjustable legs and generator are facing left, the fully extended telescoping pole and light head are facing forward.

Lentry Light Model 1SPECS

0.00
Portable Lentry Lighting LED System model 1SPECS-C23 consists of a 1000 watt generator, standard height pole, V-Spec LED (28,000 lumens), and Case C2318. With the three independently adjustable legs and telescoping pole fully extended, the system stands around 4-feet tall and next to V-Spec Case C2318 which holds the LED light head and pole when not in use.

Lentry Light Model 1SPECS-C23

0.00
LENTRY portable light system model 1SPECSS consists of a 1000 watt generator, two standard height poles, and two V-Spec LEDs (each offering 28,000 lumens for 56,000 total lumens). The three independently adjustable legs are fully extended, while one telescoping pole is fully extended and the other pole is fully retracted. Each light head is aimed to the side, in opposite directions.

Lentry Light Model 1SPECSS

0.00