Lentry Light Model 2SPECX
This is one of the most popular, if not the most popular, Lentry® Power & Light System model. With long run times, bright light, great height, and more power (2200W instead of 1000W), this system is a great choice for most portable lighting needs and large scenes.
This model is also available with either a V-Spec LED Case C2318 (holds the light head) as model 2SPECX-C23 or with Case C2318 and a Standard Height pole as model 2SPECX+S-C23.
ALL-TERRAIN LEGS. Outward curving, independently adjustable legs made of solid aircraft-grade aluminum, each having an easy-to-grab locking knob for fast, secure adjustments. Legs lift, level and protect the generator. They allow a stable, rock-solid stance nearly anywhere, while overcoming common obstacles like tall grass, snow, steep hills, standing water, and debris.
2200W HONDA EU2200i GENERATOR*. 1800W continuous power. Quiet operation. Lightweight and compact, with top carrying handle. Fuel efficient, with long run times and low emissions. Computer-safe, reliable, clean power generation. Low-oil shut off protected.
V-SPEC LED LIGHT. The V-Spec LED’s light is bright white, quite similar to natural sunlight. It uses a combination of flood and spot lights, is instant-on/instant-off (no cool down time), has long run-times, low operating temperatures, and uses very little power, while offering reliability, low maintenance, and solid state electronics (no bulbs to burn out). The lens and optics are molded together for excellent light quality and wide, uniform, far-reaching illumination. Innovative cooling fins are incorporated right into the super-slim head making it very compact The light head pivots far forward and back, while rotating over 360-degrees.
XT HEIGHT POLE. Stands 8.5- to 9-feet tall with the legs and pole fully extended; stands about 3-feet tall when totally retracted. This is the most popular height since the light can be used at any length of the telescoping pole, from fully retracted to fully extended. The pole (and light) can be disconnected (and reconnected) quickly from the generator/legs portion of the system for transport and storage.
QUICK RELEASE. Hardware installed on the neck of the light allows the light head to be connected and disconnected easily from the telescoping pole just by turning a knob.
WARRANTIES. Backed by 3- and 5-year respective warranties on the generator and light head, our overall 5-year “No BS” warranty on workmanship and materials, and Lifetime Factory Support.
*Due to EPA and CARB regulations, Honda generators cannot be shipped into California. Businesses and residents of California must purchase the required generator from within the state.
|Model||Lentry Model 2SPECX by Ventry Solutions, Inc.|
|Output AC||120V 2200W max. (18.3A) 1800W rated (15A)
"Rated" means the power the generator can supply continuously to run lights and other tools; “Max” wattage is available for short bursts.
|Output DC||12V 100W (8.3A)|
|Receptacles||20A 125V Duplex, NEMA 5-20P|
|Fuel Capacity||0.95 gallons (3.8 quarts)|
|Run Times per Tankful (approximate)||3.2 hours @ rated load (1800W)
8.1 hours @ 1/4 rated load (450W)
8.3 hours with V-Spec LED light on (336W)
|Noise Level||57 dB(A) @ rated load
48 dB(A) @ 1/4 load
|Light Head||V-Spec LED|
|Input||120V 336W (2.8A)|
|Certifications||UL, CE, IP68|
|Number of Telescoping Poles||1|
|Dimensions (L x W x H)|
|Generator with Legs Retracted||27 x 15 x 21 inches
(68.58 x 37.47 x 52.71 cm)
|V-Spec LED Light Head||14.5 x 3.5 x 15 inches
(36.83 x 8.89 x 37.47 cm)
|XT Height Pole||44 inches (111.76 cm), retracted|
|Generator and Legs Portion||59 lbs (26.5 kg), dry
up to 66 lbs (30 kg) with fuel and oil
|V-Spec LED Light Head||9.75 lbs (4.5 kg)|
|XT Height Pole||4.5 lbs (2 kg)|
|Generator||3 years commercial|
|V-Spec LED Light Head||5 years|
|All Other Components||5 years workmanship and materials + Lifetime Factory Support
|Country of Origin||USA. Lentry Systems are manufactured in Hauser, Idaho USA. Honda generators are not made in the USA but make up less than 50% of their value.|
Out of all available Accessories, any of these may be added to model 2SPECX.
LED CASE C2318 The lifetime V-Spec Case protects and holds the V-Spec LED light head only. It is included with Lentry Light Model 2SPECX-C23.
RECEIVER HITCH POLE MOUNT Alternate mounting option which holds the telescoping pole and light, expanding the versatility and functionality of Lentry Lights.
TRUCK MOUNT Alternate mounting option which holds the telescoping light and pole firmly to a wall, cabinet door, or side of truck. The light can then serve as both portable and truck-mounted lighting increasing value and function.
TACHOMETER Digital display shows RPM and total hours on the generator. Helpful for performance report, diagnostics, and maintenance.
WHEEL & HANDLE KIT Adds greater portability to all Lentry Models that consist of a 2000W/2200W generator and single pole/light. Includes wheels & a vertical handle for one-person transport, as well as side handles for two-person carry.
This video was taken during down time at fire/rescue expo. Note: the pole is retracted, not extended, in this video.
Literature to download / print
- Bid specs for Lentry model 2SPECX
- Generic version of bid specs for Lentry Lighting Systems model 2SPECX (brand names not listed)
- Specifications for all Lentry models on one sheet
- Lentry Lighting Systems Accessories Flyer
READY TO BUY?
Prices and products are available from our helpful Dealers and Ventry Solutions, Inc. Our product experts will help you choose the right model for your application and budget. Contact us now: (888) 257-8967