Lentry Light Model 2SPECSS
Dual, Compact LED
Two high-output V-Spec LEDs on standard height poles are powered by the larger, long-running 2200 watt generator on this model of Lentry® Scene Lighting System. The light heads aim and operate independently of each other and give you enough height to overcome guard rails, snow banks and other common obstacles.
This model is also available with a V-Spec LED case as model 2SPECSS-C34.
ALL-TERRAIN LEGS. Outward curving, independently adjustable legs made of solid aircraft-grade aluminum, each having an easy-to-grab locking knob for fast, secure adjustments. Legs lift, level and protect the generator. They allow a stable. rock-solid stance nearly anywhere, while overcoming common obstacles like tall grass, snow, steep hills, standing water, and debris.
2200W HONDA EU22000i GENERATOR*. 1800W continuous power. Quiet operation. Lightweight and compact, with top carrying handle. Fuel efficient, with long run times and low emissions. Computer-safe, reliable, clean power generation. Low-oil shut off protected.
TWO (2) V-SPEC LED LIGHTS. The V-Spec LED's light is bright white, quite similar to natural sunlight. They use a combination of flood and spot lights, are instant-on/instant-off (no cool down time), long run-times, low operating temperatures, and uses very little power, while offering reliability, low maintenance, and solid state electronics (no bulbs to burn out). The lens and optics are molded together for excellent light quality and wide, uniform, far-reaching illumination. Innovative cooling fins are incorporated right into the super-slim head making each light head very compact. Each light has its own on/off switch so they can be run individually or at the same time, and tips far forward and back, while rotating over 360-degrees.
TWO (2) STANDARD HEIGHT POLES. Stands between 3.5- to 4-feet tall with legs and poles fully extended, giving you the elevation needed to overcome common obstacles while maintaining maximum portability, convenience, and small storage size. The light heads and poles are compact and may be easily stored while remaining connected to the system or can be easily disconnected (and reconnected) quickly from the generator/legs ports of the system.
QUICK RELEASE. Hardware installed on the neck of the light allows the light head to be connected and disconnected easily from the telescoping pole just by turning a knob.
WARRANTIES. Backed by 3- and 5-year respective warranties on the generator and light heads, our overall 5-year “No BS” warranty on workmanship and materials, and Lifetime Factory Support.
*Due to EPA and CARB regulations, Honda generators cannot be shipped into California. Businesses and residents of California must purchase the required generator from within the state.
|Model||Lentry Model 2SPECSS by Ventry Solutions, Inc.|
|Output AC||120V 2200W max. (18.3A) 1800W rated (15A)
"Rated" means the power the generator can supply continuously to run lights and other tools; “Max” wattage is available for short bursts.
|Output DC||12V 100W (8.3A)|
|Receptacles||20A 125V Duplex, NEMA 5-20P|
|Fuel Capacity||0.95 gallons (3.8 quarts)|
|Run Times per Tankful (approximate)||3.2 hours @ rated load (1800W)
8.1 hours @ 1/4 rated load (450W)
7.1 hours with both V-Spec lights on (672W)
|Noise Level||57 dB(A) @ rated load
48 dB(A) @ 1/4 load
|Light Head||V-Spec LED|
|Input||120V 336W (2.8A) each, 672W total|
|Output||28,000 lumens each; 56,000 lumens total|
|Certifications||UL, CE, IP68|
|Number of Telescoping Poles||2|
|Dimensions (L x W x H)|
|Generator with Legs Retracted||27 x 16.5 x 21 inches
(68.58 x 41.28 x 52.71 cm)
|V-Spec LED Light Heads, each||14.5 x 3.5 x 15 inches
(36.83 x 8.89 x 37.47 cm)
|Standard Height Poles, each||15.5 inches (25.75 cm), retracted|
|Generator and Legs Portion||61 lbs (27.5 kg), dry
up to 68 lbs (30.5 kg) with fuel and oil
|V-Spec LED Light Heads||9.75 lbs (4.5 kg), each
19.5 lbs (9 kg) for both
|Standard Height Poles||2 lbs (1 kg), each
4 lbs (2 kg) for both
|Generator||3 years commercial|
|V-Spec LED Light Head||5 years|
|All Other Components||5 years workmanship and materials + Lifetime Factory Support
|Country of Origin||USA. Lentry Systems are manufactured in Hauser, Idaho USA. Honda generators are not made in the USA but make up less than 50% of their value.|
Out of all available accessories, any of these may be added to model 2SPECSS.
RECEIVER HITCH POLE MOUNT. Alternate mounting option which holds one of the telescoping lights and poles, expanding the versatility and functionality of Lentry Lights.
TRUCK MOUNT. Alternate mounting option which holds one telescoping light and pole firmly to a wall, cabinet door, or side of truck where the light can then serve as both portable and truck-mounted lighting increasing value and function.
TACHOMETER. Digital display shows RPM and total hours on the generator. Helpful for performance report, diagnostics, and maintenance.
Literature to download / print
READY TO BUY?
Prices and products are available from our helpful Dealers and Ventry Solutions, Inc. Our product experts will help you choose the right model for your application and budget. Contact us now: (888) 257-8967