Ventry PPV Fan Model 24GX160
Gasoline powered Ventry® Fan with the long, 24-inch propeller and a 4.8 hp Honda GX160 engine. This model is most often utilized as a positive pressure ventilation blower by fire fighters. It’s also a great choice as a stump fan (brush burner).
This is our engineer’s favorite model, “a real workhorse,” he calls it, noting that the Honda GX160 is commonly found on heavy duty equipment because it is tried and true. This model is a great balance of horsepower, weight, and output.
ALL-TERRAIN VERSATILITY. The three legs on this fan give it three-point stability, unlimited tilt/aiming and fast deployment. No matter the terrain or obstacles, the outward curving legs provide a rock-solid footprint and truly stand-alone operation. Legs provide the versatility to perform well in any terrain, any season, any scene.
VENTRY SAFETY PROPELLER. Two-blade, aircraft style, state-of-the-art propeller, engineered specifically for the 4.8 hp motor. Provides high CFM, longevity, and fail-safe performance.
CLEARANCE. Up to 14 inches between propeller and ground allows no intake of foreign matter so debris won’t be picked up or plug the fan. For added safety and performance, always extend the legs on your Ventry Fan when in use, even if it’s only 6 inches!
FREE-FLOW GUARD. Un-shrouded, double reinforced wire guard allows maximum air supply to the propeller which increases air volume (CFM) and decreases noise. Video: noise drops and CFM increases as a solid shroud is removed from a Ventry Fan in this demonstration.
DUAL SIDE HANDLES. Side handles provide an easy, fast way for one or two people to lift and carry the fan.
LONG DISTANCE VENTILATION. Forward sweeping propeller tips produce narrow, consistent air stream for placement far from the target (8-15 ft is ideal). Fan is well out of the way of crew and equipment and allows safer and more effective ventilation.
GX160 HONDA ENGINE. The Honda GX160 is a heavy-duty motor featuring cast iron bores, low-oil shut off protection, an on/off switch separate from the throttle, and a fuel shut-off valve.
WARRANTIES. Backed by a 3-year warranty on the Honda motor, our overall 5-year “No BS” warranty on workmanship and materials, and Lifetime Factory Support.
|Model||Ventry® Fan Model 24GX160|
|Motor/Engine||4.8 hp Honda GX160 (rated 5.5 hp prior to 2007)
|Propeller||24-inch Ventry Safety Propeller for 4.8 hp motor|
|Volume||24,000 CFM (40,770 m3/h)
Air volume in cubic feet per minute (CFM) is measured with the fan’s legs extended.
|Thrust||19.8 Lb (9 kg)
Based on Newton’s third law of motion, thrust is a reproducible measure of fan performance that allows easy comparison and has far fewer variables than direct measure of CFM.
|Fuel Capacity||3.3 qt|
|Run Time per Tank||2 hrs|
|Weight||73 Lbs (33 kg)
Base model, dry, without options.
|Dimensions (high x wide x deep)||Actual measurements may vary ±1/2 inch due to normal manufacturing processes. Measurements taken with legs retracted for storage.|
|Base Model Fan, No Wheels||28 x 27 x 21.75 in.|
|Fan with Small Solid Rubber Wheels & Skids||28 x 27 x 22.75 in.|
|Fan with Medium Flat-Free Wheels & Skids||28 x 27 x 24 in.|
|Fan with Large Pneumatic Tires||28 x 30 x 25.75 in.|
|Warranty||5 years workmanship and materials + Lifetime Factory Support|
|Engine Warranty||3 years commercial/institutional use|
|Country of Origin||USA. Manufactured in Hauser, Idaho, USA using only grade 8 hardware|
|Downloads (PDFs)||Ventry PPV Fan Model 24GX160 Bid Specs
Specifications for all Ventry Fan models on one sheet
Out of all available Accessories, these may be added to fan model 24GX160.
SPARK ARRESTER. Installed inside the muffler to capture and prevent sparks from exiting the motor during operation. Required on all engines operated within U.S. national parks.
TACHOMETER. Digital display shows RPM and total hours on the generator. Helpful for performance report, diagnostics, and maintenance.
SMALL SOLID RUBBER WHEELS & SKIDS. Includes solid polyurethane wheels with ABEC-5 bearings for smooth rolling; long handle that moves up/down from center of the fan; stair skids which protect the guard and let you roll fan easily over stairs/curbs. 5-in dia. Ideal for urban environments and mostly smooth ground.
MEDIUM FLAT-FREE WHEELS & SKIDS. Includes 6-inch dia. wheels made of hard polyurethane which can never go flat. Long central handle and stair skids also included. Large and wide for rough and unpacked terrain.
LARGE PNEUMATIC TIRES. Large, air-filled 8.5 x 3 inch tires and long handle make these ideal for off-road, rough terrain, rocks and gravel. Long vertical handle included.
ULTIMATE DOOR STOP. Well-engineered door wedge which is so useful to firefighters that one is included on every new Ventry PPV Fan.
VENTRY FILTERED MISTING RING. 15-inch stainless steel ring with 8 adjustable brass nozzles and a 22 micron filter and flush valve. Connects to a standard garden hose. Dramatically decreases temperatures. Effective for cooling and rehab, salvage and overhaul, dust control and more.