Electric Ventry PPV Fan, GFCI-Safe
The Ventry® Electric Positive Pressure Fan, for positive pressure attack and ventilation (PPA and PPV) and other commercial and industrial ventilation uses, is 15 Amp, variable speed, and GFCI-safe. Built rugged and strong but not bulky, the fan weighs less than 80 pounds, fits in a small storage space, and moves an impressive 10,500 CFM (17,837 m3/hr).
Electric PPV model 20EM3550 combines efficient three phase technology with the all-terrain three-leg design and aircraft-style Safety Propellers exclusive to Ventry Fans. These three features make model 20EM3550 valuable for aggressive, coordinated positive pressure attack and post-knock-down ventilation and non-emergency ventilation. Being very quiet, low maintenance, and having zero emissions, it is also indispensable for overhaul and situations in which 100% clean air is critical. Three phase technology reduces the positive pressure fan’s size and weight, increases sophistication. This fan will not exceed 15 Amps, even at start-up.
Model 20EM3550 is the modern equivalent to previous Ventry Electric PPV Fan models 20E1.5 and 20E1.5GFCI.
ELECTRIC. In general, having an electric motor gives this fan several benefits over those with gas engines: lower maintenance (essentially none); no emissions; quieter operation; smoother operation so less prone to vibration/walking than fans with combustion engines; and ability to be tipped/oriented in any direction. (While most gas motors will shut down if tipped more than 20 degrees, electric fans may be aimed straight down into a man hole, straight up into an attic, or set at any angle in between.)
THREE-PHASE TECHNOLOGY. Benefits of Three Phase include size, efficiency and sophistication. Size and weight are reduced 25-50% over single phase systems. The motor provides almost constant torque and delivers more power using less amperage than single phase. Finally, the technology allows for better control of motor operations which equates to greater compatibility with standard power supplies; it also allows programming of the motor to limit the power draw to 15 amps at start-up, with no initial spike, thereby avoiding the need for huge breakers and other protections.
ALL-TERRAIN VERSATILITY. Three legs and a rugged frame give this electric model the widest possible range of tilt positions and unmatched versatility. Easy aiming, three-point stability, fast deployment, rock-solid stance on steep/uneven terrain, elevated controls, and raised airstream are among the many advantages of legs...
VENTRY SAFETY PROPELLER. Smoke-busting Safety Propellers move more air with less horsepower, which is ideal with electrics where engine size is limited due to size and weight. This quiet, two-blade, aircraft style, state-of-the-art propeller provides great efficiency and durability. Most importantly, it is fail-safe. The propeller on 20EM3550 is specifically engineered to utilize all 1.5 HP efficiently.
CLEARANCE. Up to 14 inches between propeller and ground allows no intake of foreign matter so debris won’t be picked up or plug the fan. For added safety and performance, always extend the legs on your Ventry Fan when in use, even if it’s only 6 inches!
FREE-FLOW GUARD. Un-shrouded, double reinforced wire guard allows maximum air supply to the propeller which increases air volume (CFM) and decreases noise. Video: noise drops and CFM increases as a solid shroud is removed from a Ventry Fan in this demonstration.
DUAL SIDE HANDLES AND TOP ARCHES. Side handles provide an easy, fast way for one or two people to lift and carry the fan. The frame also features tall arches on top which protects the controller from both sides and provides additional points for grabbing, carrying, and leveraging.
LONG DISTANCE VENTILATION. Like all Ventry Fans, forward sweeping propeller tips produce narrow, consistent air stream for fan placement far from the target (8-15 ft is ideal). This leaves the entry and exit clear for firefighters and hose.
WARRANTIES. Backed by 1.5-year warranties on the drive and controller, our overall 5-year “No BS” warranty on workmanship and materials, and Lifetime Factory Support.
|Model||Ventry® Electric Fan Model 20EM3550|
|Motor||EM3550 1.5 hp / 1.1 kW|
|Propeller||20-inch 1.5 hp Ventry Safety Propeller|
|Volume||10,500 CFM (17,837 m3/h)
Air volume in cubic feet per minute (CFM) is measured with the fan’s legs extended.
|Thrust||8.1 Lb (3.7 kg)
Based on Newton’s third law of motion, thrust is a reproducible measure of fan performance that allows easy comparison and has far fewer variables than direct measure of CFM.
|Input||A/C drive accepts single phase input, 110V +/-10%, 50/60 Hz +/-5%
(Plugs into normal household current)
|Output to Motor||Three-phase; controller converts single phase to three phase|
|Amps||15A or less. No initial power spike, even at start-up.|
|Controller||Variable frequency drive; allows speed from 0 to 3000 RPM|
|Nema Plug||Locking plug L5-15 (standard) or non-locking 5-15 (upon request)|
|Weight||78 Lbs (35.4 kg)
Base model without options.
|Dimensions (high x wide x deep)||
Actual measurements may vary ±1/2 inch due to normal manufacturing processes. Measurements taken with legs retracted for storage. With legs fully extended, electric fans stand about 3 feet tall.
|Base model fan, no wheels||23.25 x 23.25 x 20.25 in.|
|Fan with Small Solid Rubber Wheels & Skids||23.25 x 23.25 x 21 in.|
|Fan with Medium Flat-Free Wheels & Skids||23.25 x 27.5 x 22.5 in.|
|Warranty||5 years workmanship and materials + Lifetime Factory Support|
|Drive and Motor Warranties||1.5 years|
|Listed||All electrical components are UL (Underwriters Laboratories) and CSA listed (Canadian Standards Association)|
|Country of Origin||USA. Manufactured in Hauser, Idaho, USA using only grade 8 hardware|
|Downloads (PDFs)||Ventry Electric Positive Pressure Fan Model 20EM3550 Bid Specs
Specifications for all Ventry Fan models on one sheet
Any of the following accessories may be added to the electric fan.
SMALL SOLID RUBBER WHEELS & SKIDS. Includes solid polyurethane wheels with ABEC-5 bearings for smooth rolling; long handle that moves up/down from center of the fan; stair skids which protect the guard and let you roll fan easily over stairs/curbs. 5-in dia. Ideal for urban environments and mostly smooth ground.
MEDIUM FLAT-FREE WHEELS & SKIDS. Includes 6-inch dia. wheels made of hard polyurethane which can never go flat. Long central handle and stair skids also included. Large and wide for rough and unpacked terrain. Read more about wheels.
ULTIMATE DOOR STOP. Well-engineered door wedge which is so useful to firefighters that one is included on every new Ventry PPV Fan.
VENTRY FILTERED MISTING RING. 15-inch stainless steel ring with 2 sets of adjustable nozzles and a water-supply filter which dramatically decreases temperatures. Effective for cooling and rehab, salvage and overhaul, dust control and more.
Please specify the plug when ordering. Choose either twist-locking NEMA plug L5-15 (default; recommended) or non-locking NEMA plug 5-15. Other plugs available upon request.
Insufficient power supply. Many factors affect power supply, including other equipment drawing power from the same circuit and the gauge and length of cord into which the fan may be plugged. The electric fan’s digital display will flash a blinking red line to warn you if its power supply is insufficient for the draw. Simply turn down the fan’s variable speed to decrease the power draw. Air volume will decrease accordingly.
Pre-2004 GFCI Circuits. Sensitivity issues may arise with GFCI protected circuit breakers manufactured prior to 2004. If you have trouble running equipment on a GFCI circuit that is supposed to be GFCI-compatible, you may need to upgrade the circuit breaker. For more details or to discuss, please call us.
Electric Ventry Fan Model 20EM3550 is programmed to limit its power draw at start-up to 15 Amps, with no initial spike, thereby avoiding the need for huge breakers and other protections.
This fan plugs into a normal household current (single phase) but converts it to three-phase for the motor.
For additional explanations of three phase efficiency, there is a good explanation on Wikipedia.
Variable speed drive allows for precise setting anywhere between 0 and 3000 RPM to accommodate lower power supplies.
READY TO BUY?
Prices and products are available from our helpful Dealers and Ventry Solutions, Inc. Our product experts will help you choose the right model for your application and budget. Contact us now: (888) 257-8967