WHICH LENTRY IS BEST FOR YOU?

Please see our Dealer Locator for a list of dealers for each state.

To get the LENTRY unit that fits your needs...

1. Choose one of three generators
2. Choose the corresponding frame/legs (generator-specific)
3. Decide on single or dual lights
4. Choose from two light heads of different wattages (depends on the generator rating)
5. Decide polelight height(s), standard, extra tall, or a combination
6. Choose options

Choose from 3 LENTRY Frames:

• EU1000i Frame - fits Honda EU1000i generator
• EU2000i Frame - fits Honda EU2000i generator
• PC17Ri Frame - fits Baldor PC17Ri generator

If you set a four-legged table on uneven ground, it will always wobble, but three legs are always stable. LENTRY Frames curve outward for a wider footprint the farther up the generator is raised, giving your generator a secure, flat operating surface.

Tripod LENTRY Frames/legs are made of rugged, powder-coated steel with independently extendable screw-lock legs to lift and level the light and generator. They are extremely stable, practically indestructible, and stand solidly on almost any terrain.

LENTRY Frames can be added to existing generators very easily, if you have a Honda EU1000i, Honda EU2000i or Baldor PC17Ri.

Please note, frames are generator-specific.

Photo: Shown at left, an EU1000i with legs only.

Top of page

As of Spring 2008, the bracketry that holds the polelights to the frames of all LENTRY Units has been upgraded. Instead of the white t-shaped bracketry that held standard-height polelights before, LENTRY Systems will now have a longer, powder-coated bracket with a locking handle which allows the polelight to be quickly separated from the frame. These new brackets are not yet shown in most of our product photos. Click here for complete info.

At left is the discontinued bracketry. At right is the new, deep, locking Single Light Base (with no polelight in it). Below is a Dual Light Base, used on Dual LENTRY Units. It holds two lights at the unit’s sides.

Fully articulated, telescoping, pole-mounted Halogen flood lights mount directly to the front or side of LENTRY frames. There are two polelights from which to choose, depending on your intended use and the generator wattage:

• 650 watt/120 volt hi-infrared light works with any of the three generators. The bulb puts out 25,000 lumens, more light than most 1000 watt Halogens. It uses most of the available power of the EU1000i generator and provides tons of light. With the EU2000i or PC17Ri generators, it provides lots of light and leaves some power leftover to run additional tools or even a second 650W light!
• 1500 watt/120 volt light are available for use with EU2000i generators and utilize most of the generator wattage.
• Click here for Light Specs
• Click here for Generator Ratings and Specs

650W light	1500W light
Not sure which light head to choose? Click here for FAQ. Both lightheads are now available with XT polelights, allowing complete LENTRY units to reach over 8 feet tall! Click here for the Press Release.

Digital Tachometer and Hour Meter
Optional with all three generators. Tracks total hours and RPM, great for diagnostics and maintenance.

Polelight Truck-Mount Option

Now available: an option for mounting LENTRY™ telescoping polelights to the side of your truck, so they serve double-duty as truck-mounted lighting while technically “in storage.” This option is ideal for extra tall XT units but can work with standard height systems also.

Click here to Download Brochure (PDF)
Click here for html press release.

LENTRY Systems are assembled per your order and ship direct from the factory via UPS Ground, usually within 5 business days. Click here for shipping costs chart.

*Honda limits what we may display on the Web. For pricing not shown here, please contact a Dealer near you or email the J. Neils Enterprises, Inc.. More options are also available, including DC charging cables and parallel cables (for doubling the existing power of a generator), but are not shown on our site. Please call for details.